glReadPixels — read a block of pixels from the frame buffer
void glReadPixels( | GLint | x, |
| GLint | y, | |
| GLsizei | width, | |
| GLsizei | height, | |
| GLenum | format, | |
| GLenum | type, | |
| GLvoid * | data); |
x, ySpecify the window coordinates of the first pixel that is read from the frame buffer. This location is the lower left corner of a rectangular block of pixels.
width, height
Specify the dimensions of the pixel rectangle.
width and height of one correspond to a single pixel.
format
Specifies the format of the pixel data.
The following symbolic values are accepted:
GL_COLOR_INDEX,
GL_STENCIL_INDEX,
GL_DEPTH_COMPONENT,
GL_RED,
GL_GREEN,
GL_BLUE,
GL_ALPHA,
GL_RGB,
GL_BGR,
GL_RGBA,
GL_BGRA,
GL_LUMINANCE, and
GL_LUMINANCE_ALPHA.
type
Specifies the data type of the pixel data.
Must be one of
GL_UNSIGNED_BYTE,
GL_BYTE,
GL_BITMAP,
GL_UNSIGNED_SHORT,
GL_SHORT,
GL_UNSIGNED_INT,
GL_INT,
GL_FLOAT,
GL_UNSIGNED_BYTE_3_3_2,
GL_UNSIGNED_BYTE_2_3_3_REV,
GL_UNSIGNED_SHORT_5_6_5,
GL_UNSIGNED_SHORT_5_6_5_REV,
GL_UNSIGNED_SHORT_4_4_4_4,
GL_UNSIGNED_SHORT_4_4_4_4_REV,
GL_UNSIGNED_SHORT_5_5_5_1,
GL_UNSIGNED_SHORT_1_5_5_5_REV,
GL_UNSIGNED_INT_8_8_8_8,
GL_UNSIGNED_INT_8_8_8_8_REV,
GL_UNSIGNED_INT_10_10_10_2, or
GL_UNSIGNED_INT_2_10_10_10_REV.
dataReturns the pixel data.
glReadPixels returns pixel data from the frame buffer,
starting with the pixel whose lower left corner
is at location (x, y),
into client memory starting at location data.
Several parameters control the processing of the pixel data before
it is placed into client memory.
These parameters are set with three commands:
glPixelStore,
glPixelTransfer, and
glPixelMap.
This reference page describes the effects on glReadPixels of most,
but not all of the parameters specified by these three commands.
If a non-zero named buffer object is bound to the GL_PIXEL_PACK_BUFFER target
(see glBindBuffer) while a block of pixels is
requested, data is treated as a byte offset into the buffer object's data store
rather than a pointer to client memory.
When the ARB_imaging extension is supported, the pixel data may
be processed by additional operations including color table lookup,
color matrix transformations, convolutions, histograms, and minimum and
maximum pixel value computations.
glReadPixels returns values from each pixel with lower left corner at
format specifies the format for the returned pixel values;
accepted values are:
GL_COLOR_INDEX
Color indices are read from the color buffer
selected by glReadBuffer.
Each index is converted to fixed point,
shifted left or right depending on the value and sign of GL_INDEX_SHIFT,
and added to GL_INDEX_OFFSET.
If GL_MAP_COLOR is GL_TRUE,
indices are replaced by their mappings in the table GL_PIXEL_MAP_I_TO_I.
GL_STENCIL_INDEX
Stencil values are read from the stencil buffer.
Each index is converted to fixed point,
shifted left or right depending on the value and sign of GL_INDEX_SHIFT,
and added to GL_INDEX_OFFSET.
If GL_MAP_STENCIL is GL_TRUE,
indices are replaced by their mappings in the table GL_PIXEL_MAP_S_TO_S.
GL_DEPTH_COMPONENT
Depth values are read from the depth buffer.
Each component is converted to floating point such that the minimum depth
value maps to 0 and the maximum value maps to 1.
Each component is then multiplied by GL_DEPTH_SCALE,
added to GL_DEPTH_BIAS,
and finally clamped to the range
GL_REDGL_GREENGL_BLUEGL_ALPHAGL_RGBGL_BGRGL_RGBAGL_BGRAGL_LUMINANCEGL_LUMINANCE_ALPHA
Processing differs depending on whether color buffers store color indices
or RGBA color components.
If color indices are stored,
they are read from the color buffer selected by glReadBuffer.
Each index is converted to fixed point,
shifted left or right depending on the value and sign of GL_INDEX_SHIFT,
and added to GL_INDEX_OFFSET.
Indices are then replaced by the red,
green,
blue,
and alpha values obtained by indexing the tables
GL_PIXEL_MAP_I_TO_R,
GL_PIXEL_MAP_I_TO_G,
GL_PIXEL_MAP_I_TO_B, and
GL_PIXEL_MAP_I_TO_A.
Each table must be of size
If RGBA color components are stored in the color buffers,
they are read from the color buffer selected by glReadBuffer.
Each color component is converted to floating point such that zero intensity
maps to 0.0 and full intensity maps to 1.0.
Each component is then multiplied by GL_c_SCALE and
added to GL_c_BIAS,
where c is RED, GREEN, BLUE, or ALPHA.
Finally,
if GL_MAP_COLOR is GL_TRUE,
each component is clamped to the range
GL_PIXEL_MAP_c_TO_c,
where c is R, G, B, or A.
Unneeded data is then discarded.
For example,
GL_RED discards the green, blue, and alpha components,
while GL_RGB discards only the alpha component.
GL_LUMINANCE computes a single-component value as the sum of
the red,
green,
and blue components,
and GL_LUMINANCE_ALPHA does the same,
while keeping alpha as a second value.
The final values are clamped to the range
The shift, scale, bias, and lookup factors just described are all specified by glPixelTransfer. The lookup table contents themselves are specified by glPixelMap.
Finally, the indices or components
are converted to the proper format,
as specified by type.
If format is GL_COLOR_INDEX or GL_STENCIL_INDEX
and type is not GL_FLOAT,
each index is masked with the mask value given in the following table.
If type is GL_FLOAT, then each integer index is converted to
single-precision floating-point format.
If format is
GL_RED,
GL_GREEN,
GL_BLUE,
GL_ALPHA,
GL_RGB,
GL_BGR,
GL_RGBA,
GL_BGRA,
GL_LUMINANCE, or
GL_LUMINANCE_ALPHA and type is not GL_FLOAT,
each component is multiplied by the multiplier shown in the following table.
If type is GL_FLOAT, then each component is passed as is
(or converted to the client's single-precision floating-point format if
it is different from the one used by the GL).
type
| Index Mask | Component Conversion |
|---|---|---|
GL_UNSIGNED_BYTE
|
|
|
GL_BYTE
|
|
|
GL_BITMAP
|
|
|
GL_UNSIGNED_SHORT
|
|
|
GL_SHORT
|
|
|
GL_UNSIGNED_INT
|
|
|
GL_INT
|
|
|
GL_FLOAT
| none |
|
Return values are placed in memory as follows.
If format is
GL_COLOR_INDEX,
GL_STENCIL_INDEX,
GL_DEPTH_COMPONENT,
GL_RED,
GL_GREEN,
GL_BLUE,
GL_ALPHA, or
GL_LUMINANCE,
a single value is returned and the data for the
GL_RGB and GL_BGR return three values,
GL_RGBA and GL_BGRA return four values,
and GL_LUMINANCE_ALPHA returns two values for each pixel,
with all values corresponding to a single pixel occupying contiguous space
in data.
Storage parameters set by glPixelStore,
such as GL_PACK_LSB_FIRST and GL_PACK_SWAP_BYTES,
affect the way that data is written into memory.
See glPixelStore for a description.
Values for pixels that lie outside the window connected to the current GL context are undefined.
If an error is generated,
no change is made to the contents of data.
GL_INVALID_ENUM is generated if format or type is not an
accepted value.
GL_INVALID_ENUM is generated if type is GL_BITMAP and format is
not GL_COLOR_INDEX or GL_STENCIL_INDEX.
GL_INVALID_VALUE is generated if either width or height is negative.
GL_INVALID_OPERATION is generated if format is GL_COLOR_INDEX
and the color buffers store RGBA color components.
GL_INVALID_OPERATION is generated if format is GL_STENCIL_INDEX
and there is no stencil buffer.
GL_INVALID_OPERATION is generated if format is GL_DEPTH_COMPONENT
and there is no depth buffer.
GL_INVALID_OPERATION is generated if type is one of
GL_UNSIGNED_BYTE_3_3_2,
GL_UNSIGNED_BYTE_2_3_3_REV,
GL_UNSIGNED_SHORT_5_6_5, or
GL_UNSIGNED_SHORT_5_6_5_REV
and format is not GL_RGB.
GL_INVALID_OPERATION is generated if type is one of
GL_UNSIGNED_SHORT_4_4_4_4,
GL_UNSIGNED_SHORT_4_4_4_4_REV,
GL_UNSIGNED_SHORT_5_5_5_1,
GL_UNSIGNED_SHORT_1_5_5_5_REV,
GL_UNSIGNED_INT_8_8_8_8,
GL_UNSIGNED_INT_8_8_8_8_REV,
GL_UNSIGNED_INT_10_10_10_2, or
GL_UNSIGNED_INT_2_10_10_10_REV
and format is neither GL_RGBA nor GL_BGRA.
The formats GL_BGR, and GL_BGRA and types
GL_UNSIGNED_BYTE_3_3_2,
GL_UNSIGNED_BYTE_2_3_3_REV,
GL_UNSIGNED_SHORT_5_6_5,
GL_UNSIGNED_SHORT_5_6_5_REV,
GL_UNSIGNED_SHORT_4_4_4_4,
GL_UNSIGNED_SHORT_4_4_4_4_REV,
GL_UNSIGNED_SHORT_5_5_5_1,
GL_UNSIGNED_SHORT_1_5_5_5_REV,
GL_UNSIGNED_INT_8_8_8_8,
GL_UNSIGNED_INT_8_8_8_8_REV,
GL_UNSIGNED_INT_10_10_10_2, and
GL_UNSIGNED_INT_2_10_10_10_REV are available only if the GL version
is 1.2 or greater.
GL_INVALID_OPERATION is generated if a non-zero buffer object name is bound to the
GL_PIXEL_PACK_BUFFER target and the buffer object's data store is currently mapped.
GL_INVALID_OPERATION is generated if a non-zero buffer object name is bound to the
GL_PIXEL_PACK_BUFFER target and the data would be packed to the buffer
object such that the memory writes required would exceed the data store size.
GL_INVALID_OPERATION is generated if a non-zero buffer object name is bound to the
GL_PIXEL_PACK_BUFFER target and data is not evenly divisible
into the number of bytes needed to store in memory a datum indicated by type.
GL_INVALID_OPERATION is generated if glReadPixels
is executed between the execution of glBegin
and the corresponding execution of glEnd.
Copyright © 1991-2006 Silicon Graphics, Inc. This document is licensed under the SGI Free Software B License. For details, see http://oss.sgi.com/projects/FreeB/.